MIG 350 Welder Wire Automatic Feeder System Welding Accessory Euro Connection
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller’s listing for full details. See all condition definitions MPN:
Does Not Apply
Country/Region of Manufacture: China
Bundle Listing: No UPC:
This listing is for the Wire Feeder ONLY.24ft gas, power, ground cables.
The Allpro MIG-350 sets the Standard for Professional MIG gas welding needs, with robust control board features that allow for consistent reliable performance in a variety of demanding conditions.
3-Phase Inverter ensures stability of output voltage when fluctuations occur in input power, arc length changes. This self-adjustability ensures a stable welding process throughout the workpiece.
Reduced Splatter with High Deposit Efficiency
Lower distortion and strong weld formation.
A Strong pulse strike ensures consistently reliable arc-starts.
Minimal molten ball if arc is stopped mid-weld.
Auto-lock functionality reduces labor intensity on long welds.
Stable wire feeding with consistent output power.
Lightweight, Portable Design.
Efficient, energy saving design.
Suitable for a wide range of work environments.
To be eligble for Allpro’s Warranty program, it is required that installation is carried out by a licensed electrician in your area! Please retain records of this installation for future reference.
Effective 10 December 2014
STATEMENT OF LIMITED LIABILITY
The Allpro Machinery Inc.(Allpro) warrants to the end user (purchaser) of all new welding and cutting equipment that it will be free of defects in workmanship and material.
This warranty is void if Allpro or its authorized service facility finds that the equipment has been subjected to improper installation, improper care or abnormal operations, or modified by any party other than Allpro.
Allpro will respect warranty claims on warranted equipment listed below in the event of defect during the warranty period. All warranty periods start from the date of purchase from a Allpro authorized distributor or authorized service facility to the original end user or from the date of manufacture if original invoice cannot be provided and are as follows: 7 Years Parts ? 3 Years Labor
Main rectifier and inverter module (only to include rectifier module and IGBT module ): 3 Years Parts and Labor
All Allpro welding machine other electronic parts and modules, wire feeders: 1 Year Parts and Labor
Water coolers and tractors: 90 Days Parts
All Allpro welding gun, cable assemblies and spool guns
CONDITIONS OF WARRANTY TO OBTAIN WARRANTY COVERAGE:
The purchaser must contact Allpro or an authorized service facility about any defect claimed under the warranty. Determination of warranty on welding products will be made by Allpro or it?s authorized service facility.
If Allpro or a it?s authorized service facility confirms the existence of a defect covered by this warranty, the defect will be corrected by repair or replacement at Allpro?s expense. At Allpro?s request, the purchaser must return, to Allpro or it?s authorized service facility, any ?Goods? claimed defective under the warranty.
The purchaser is responsible for shipment to and from the
Allpro or it?s authorized service facility.
Allpro will not accept responsibility or liability for repairs made outside of a authorized service facility.
Allpro?s liability under this warranty shall not exceed the cost of correcting the defect of the Allpro product.
Allpro will not be liable for incidental or consequential damages (such as loss of business, etc.) Caused by the defect or the time involved to correct the defect.
Allpro is not responsible for the replacement of any expendable part that is required due to normal wear.
Items integrated by Allpro, but manufactured by others, such as engines, engine components, air compressors batteries and accessories are excluded. These items are covered by the manufacturer?s warranty.
THIS WRITTEN WARRANTY IS THE ONLY EXPRESS WARRANTY PROVIDED BY ALLPRO WITH RESPECT TO ITS PRODUCTS.
WARRANTIES IMPLIED BY LAW SUCH AS THE WARRANTY OF MERCHANTABILITY ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY FOR THE EQUIPMENT INVOLVED.
THIS WARRANTY GIVES THE PURCHASER SPECIFIC LEGAL RIGHTS. THE PURCHASER MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
Specification: MIG 350 Welder Wire Automatic Feeder System Welding Accessory Euro Connection
|Country/Region of Manufacture|
|30 Day Free Return|
Tiger Mountain Industrial Company, LLC. is owned and operated in Bellingham WA. We specialize in the precision manufacturing and timely delivery of cast, forged, fabricated and machined products to exact specifications. We aim to build long-term relationships with North American manufacturers by supplying superior quality products at unbeatable prices. Feel free to contact us if you need further information regarding our products or manufacturing capabilities!
Shipping from : United States (US)
|Within United States (US)||Free|
Free shipping on the select item. Shipping to: United States Excludes: Alaska/Hawaii, US Protectorates, APO/FPO, PO Box Please allow additional time if international delivery is subject to customs processing.
Some product offers 60 days returns, some are not accept for the return, please check the product detail page for the return policy or contact us before return the item.